Can 11 speed replace 8 speed cassette?

Converting an 8-speed wheel to 11-speed Since the 11-speed sprocket is designed to be 1.85mm higher than the 8-speed sprocket, if your current wheel is a 10-speed wheel, you will not be able to convert it to 11-speed. If your current wheel is a 10-speed wheel, you will not be able to change to 11-speed.

Are all 8 speed cassettes compatible?

Most Shimano-compatible freewheel bodies accept 8-speed cassettes.. Note the following exceptions: Aluminum 10-speed freehub bodies with taller splines work only with 10-speed sprockets. The wider 8-speed cassette does not fit on the narrower 7-speed body.

Can I replace an 8 speed cassette with a 10 speed cassette?

Also be aware that prolonged use of a 10-speed cassette on an 8/9-speed freehub body will cause dents to form in the freehub body (because the 10-speed cogs are so narrow). The 10-speed freehub bodies have taller splines, so they avoid this problem (but don’t work with 8- or 9-speed cassettes).

Can I put a bigger cassette on my bike?

Yes, almost any bike is compatible with bigger cassettes, bike drivetrain is groupset of components that works in perfect harmony, any miss reconfiguring can break the perfect functionality of the system, parts that need to be changed and reconfigured when putting bigger cassette which is long-chain, wide cage …

Can I replace my 8 speed cassette with a 10 speed?

Can I put a 10 speed cassette on an 8 speed wheel?

Nope! 8, 9, 10 are all the same size cassette and freehub. A 7 speed would need a spacer.

Does 8 speed cassette need a spacer?

Registered. Nope! 8, 9, 10 are all the same size cassette and freehub. A 7 speed would need a spacer.

Can you put a 10 speed cassette on an 8 speed bike?

Can you use a 10 speed derailleur on a 8 speed cassette?

You will need a 10 spd rear derailleur to work with a 10 spd cassette, because the spacing is smaller with a 10 spd setup. You will need a 10 speed chain for a 10 speed setup, a 9 speed chain for a 9 speed setup and any 8 speed chain will work on 8-7-6 speed or lower.

Which cassette is best for climbing hills?

For hill climbing and mountainous terrain, we recommend a road cassette such as the 11-32T SRAM Red 22 XG1190 11 Speed Cassette (A2), or the 11-34T Shimano Ultegra R8000 11 Speed Cassette.

Is an 11 34 cassette good for climbing?

All other things being equal, the 34T sprocket on the 11-34T cassette is going to give you the easiest gear. If your bike is currently fitted with an 11-28T cassette, switching to an 11-34T cassette will make climbing less of a struggle.

Can I put a 9 speed cassette on a 8 speed hub?

Yes. 8 and 9 speed cassettes are interchangeable.

Can I fit a 9 speed cassette on an 8 speed hub?

How do I change my 8 speed to 9 speed?

Doing an 8 to 9 speed conversion can be done 2 ways. The correct way is to replace the front derailler, cassette, chain, chain rings and the shifters. This can be rather expensive, but it will give better shifting than doing it the other way. The “other way” is just to buy shifters, chain and a cassette.

Will an 8 speed cassette fit a 10 speed hub?

Nope! 8, 9, 10 are all the same size cassette and freehub.

Will a 12 speed cassette fit on an 8 speed hub?

It is a wide ratio cassette that has an alloy spider, lockring, and spacer. It will fit any Shimano or SRAM 8, 9, or 10-speed freehub body, and Shimano Dynasys 11-speed mountain freehub bodies.

Can I use a 9 speed cassette on an 8 speed?

yes you can use the derailer on the 8 speed cassette. The major difference between 8 and 9 speed is indexing. So for an 9 speed cassette you would need 9 speed shifters.

Can I use an 8 speed shifter with a 10 speed cassette?

Registered. A 10 speed chain should work on an 8-speed drivetrain. if you want 10 speeds, you will need a 10 speed-specific chain, cassette, derailleur and shifter (and a new cable while you’re at it).

Is an 11 32 cassette good for climbing?