How do I reset my Plantronics BackBeat 903+ headset?

Press and hold the power button for 5-6 seconds, until light on the headset starts flashing an alternating red-blue. Release the power button and set the headset aside. On your cell phone/device, go to the Bluetooth menu and search for (or add) a device. The cell phone should find the headset.

Why won’t my Plantronics headphones turn on?

If your headset seems to charge (i.e., the light turns on), but then won’t power on, try resetting the headset. While pressing the power button, plug in the AC charger. The light on the headset should turn on. Once the light turns on, let go of the power button.

How do I reset my PLT headphones?

How to Reset a Plantronics Bluetooth

1. Turn on the headset by pressing the “Power/Answer” call button.
2. Hold down the “Power” button and the “Lower Volume” button (minus button) together until the light goes out.
3. Wait for one minute for the reset to be complete.
4. Turn on the headset again by pressing the “Power” button.

Why are my PLT headphones not charging?

The headset may not be charging. If your headset will not charge, then the golden headset connectors may be too dirty. Sometimes, dirt piles up on the headset preventing the flow of electric current to the battery. This can easily be fixed by using a cotton swab to thoroughly remove the dirt off of the connectors.

How do you pair Plantronics headphones?

Start with your Plantronics device powered ON, then press and hold the dedicated Bluetooth button until the LED flashes red and blue. Activate Bluetooth on your phone and search for new devices, the name of the Plantronics device will appear as “PLT” followed by the model name.

How do I pair my Plantronics BackBeat fit?

To pair your BackBeat FIT to your phone:

1. Starting with your headset powered off, press and hold the power button until the LED flashes red and blue.
2. Activate Bluetooth on your phone and set it to discover new devices. To do so:
3. Tap PLT_BBT to complete the pairing.

How do I fix my Plantronics Bluetooth headset?

Bluetooth Headset Troubleshooting: Problems Pairing

1. Power off your phone.
2. Remove the battery, if possible, and leave it out for about 30 seconds.
3. Replace the battery.
4. Power on the phone.
5. Repeat the pairing process.

Can you reset Plantronics headset?

Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware.

How do you fix wireless headphones that won’t charge?

Check if the charging port is loose or damaged Inspect the charging port of your headphones for any damage like bent connectors or bent metal. Also, make sure that the port itself isn’t loose when you touch it, as this could be a sign that the connectors have detached from the headset.

How do you fix a Bluetooth headset that won’t turn on?

What If the Reset Doesn’t Work?

1. Make sure your device’s Bluetooth is turned on.
2. Unpair all devices connected to your headset.
3. Restart your smartphone or laptop.
4. Delete your headset from your device and rediscover it.
5. Make sure your headset is in close proximity to your device.
6. Charge your headset and your device.

How do I connect my Plantronics headset to my Android phone?

Go to Settings menu on the Android phone. Ensure Bluetooth is enabled, and then tap Bluetooth to access the settings. Tap Search or Scan (depending on the phone) so the phone can locate the headset. Once the phone finds the headset, tap PLT_Legend to complete the pairing process.

How do I put my Plantronics Bluetooth in pairing mode?

Press and hold the Call button until you hear “pairing.” While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices. Select “Poly V5200 Series.” Once successfully paired, indicator lights will stop and you will hear “pairing successful.”

How do I pair my Plantronics headset to my phone?

Start with your headset powered OFF, then press and hold the call control/power button until the LED flashes red and blue. Activate Bluetooth on your phone and search for new devices, the name of the Plantronics Bluetooth headset will appear as “PLT” followed by the model name.

Can Plantronics headset be repaired?

Plantronics will, at their option, repair or replace the Products that do not conform to the warranty. Plantronics may use functionally equivalent reconditioned/refurbished/re manufactured/pre-owned or new Products or parts.

How do I fix my headphones when only one side works?

How to fix earphones when only one side is working

1. Straighten out the earphone cord.
2. Try another pair of earphones.
3. Clean the headphone jack.
4. Restart the device.
5. Check the device audio settings.
6. Check for the earphone damaged wires.

How do I factory reset my Plantronics?

Why are my headphones not working?

Restart the device If everything seems to be in order, but your headphone jack is not working, there’s another simple fix you can try, which is restarting your device. This can sometimes solve loads of different smartphone-related problems and takes less than a minute to do.

Why did my headphones suddenly stop working?

Earphones/earbuds typically stop working due to wire strain, faulty wiring from the manufacturer, moisture damage, or damage to the drivers that produce the sound. These occurrences may cause shorts in the electrical flow of audio or complete disconnection between the drivers and the audio source.

Why my headset is not working?

Dust, lint and dirt may block the connection between the jack and the headphones. Check for this and clean the jack using a cotton swab damped with some rubbing alcohol to get the lint and dust out, or use a can of compressed air if you have one close by. Plug the headphones back in and see if they work.

How do I pair my Plantronics BackBeat?

How do you put a Plantronics BackBeat in pairing mode?

To pair your BackBeat FIT to your phone: Activate Bluetooth on your phone and set it to discover new devices. To do so: iPhone users click Settings > Bluetooth > On. Android users click Settings > Wireless & Networks > Bluetooth: On > Scan for devices.