How do I choose a flute head joint?

Investigate Flute Embouchure Hole Size and Shape A large hole has a big sound. A small hole has a sweet sound. An oval shape tends to be fluid and perform well in the upper octaves. A rectangular shape tends to be strong in the mid and lower registers.

What is the head joint flute?

The headjoint is the voicebox of the flute, and the most important part when it comes to tone production. The two main factors in sound quality are the material the headjoint is made from and, arguably more significantly, the “cut”. Searching for the perfect headjoint can become an incurable disease!

Are flute Headjoints interchangeable?

Flute headjoints are frequently NOT interchangeable. Although the diameters differ very little, the adjustment of the fit here must be very accurate. Any good technician will have the specialised tools to expand or shrink most heads to fit most flutes, and this is quick, routine work.

How do I stop my flute from rolling?

You might find it useful to purchase a Thumbport, which is basically a rubber attatchment that you can put on your flute to help you hold it with your right hand. It prevents rolling [ to an extent], puts your hand in a more ergonomic position, and helps rebalance the way you hold your flute.

How much does a Gemeinhardt flute cost?

Compare with similar items

Where are Sonare flutes made?

Powell’s Massachusetts workshop
Sonare flutes feature bodies made using patented Zinki technology (U.S. patent #7,420,109) and handmade Powell Signature headjoints. Both the body and headjoint are made at Powell’s Massachusetts workshop.

How long is a head joint on flute?

The most common setting for a headjoint cork assembly for a C flute is 17.3mm. This means that the distance from the dead center of the embouchure hole to the plate of the headjoint cork assembly is 17.3mm.

Are piccolo Headjoints interchangeable?

Piccolos differ significantly in both tenon/bore size and outer circumference, making it impossible to fit the same headjoint to piccolo bodies of different makers. That is, until the invention of the revolutionary MANCKE Interchangeable Adaptor System.

What do you use for flute joints?

It is not necessary to oil the inside of the head joint. Use a piece of kitchen towel wrapped around a thin dowel or a flute cleaner, dip it in the oil and thoroughly coat the bore with the oily towel. Repeat with each joint, pushing the towel into the bore to cover it with oil.

Why is my flute so dirty?

In the case of the silver on your flute, the tarnish comes from the silver reacting with hydrogen sulfide, a gas which is present in extremely small and usually harmless quantities due to air pollution. The process of tarnishing is sped up by oxygen, various oils in your skin, and heat.

Why is my flute always out of tune?

However, if the mark is too far to one side, that means your flute is out of tune. In order to adjust the cork, turn the crown clockwise or counterclockwise a half turn at a time. To learn how to tune your flute by pulling out the headjoint, keep reading!

Are old flutes worth anything?

The higher the flute level, the more costly it will be. A beginner flute price is in the range of hundreds of dollars, professional flutes, are in the thousands range.

Which brand of flute is best?

5 Best Professional Flute Reviews and the Best Professional Flute Brands

• 1) Pearl Quantz Series Flute. What is this?
• 2) Gemeinhardt 32B Flute.
• 3) Yamaha 677H Professional Flute.
• 4) Gemeinhardt Model 3OB Flute.
• 5) Lazarro Professional Silver Nickel Flute.

What do you call a person who plays the flute?

/ˈflɔːtɪst/, /ˈflaʊtɪst/ (British English) (North American English flutist) ​a person who plays the fluteTopics Musicc2.

How do I stop my flute from overblowing?

Rolling in or out with the lips relative to the edge gives the player a greater range of volume and expression, and aids the process of overblowing to achieve the higher register.

What is the hole in a flute called?

The head joint is where the sound of the flute originates as the player blows air into the flute through the embouchure hole (also known as the blow hole or mouth hole). The embouchure hole is in the center of the lip plate (or embouchure plate) that anchors the lips to the flute.

Are a fife and a piccolo the same thing?

The fife, most accurately described, is any cylindrically bored transverse flute, usually in one piece (but sometimes two), usually somewhat longer than the piccolo and having only six fingerholes with no keys.

Is a flute and a fife the same?

Like the Irish flute and the tin whistle, the ancient fife is a six-hole simple system flute. These flutes are unable to play all chromatic pitches, while many of the chromatic pitches which they can play are grossly out of tune.

Can I use Vaseline on a flute?

You should never use cork grease or vaseline on the joints of the flute. The keys themselves should only be oiled by a professional instrument repairer. The two joins on the flute (between the headjoint, the body and the footjoint) don’t need lubricating per se, but sometimes they can get a bit tight.