Is Sky Hub sr102 dual band?

Quite astonishingly the Hub 2 remains a single band 802.11n 2.4GHz router while virtually all rivals have moved onto faster dual band 2.4GHz and 5GHz 802.11n routers.

How do I enable UPnP on Sky?

Here’s how:

1. Stick 192.168.
2. Click the “advanced” tab which is fourth option from the left at the top of the page.
3. Enter Username: Admin and Password: Sky.
4. 5 options should appear below.
5. Under this tab check the box next to “Turn UPnP On”.
6. At the bottom of the page click “Apply”.
7. You are done, NAT should now be open.

How do I change the firewall settings on my Sky router?

Click the Firewall Rules. Click Add under Inbound Services. If you have a Sky Q hub fill in the IPv4 settings….

1. All of the ports you need are forwarded.
2. The right protocol is in use.
3. Any other active firewalls on your home PC (such as McAfee, Norton or Windows Firewall) may also need port forwarding set up.

Can I use any Sky router with Sky Broadband?

You can use any router you like to connect to Sky broadband systems. Clearly, an ADSL2+ router will not work with anything other than Sky broadband essentials. So, that router you have will not work with Sky superfast service, eg: fibre to the cabinet (VDSL2).

What is SR102?

The Sky SR102 (Black) is an 400MHz dual-core Broadcom MIPS-based ADSL2+/VDSL2 router with 802.11bgn wireless and ADSL2+ support. It has a 4-port switch (3x LAN , 1x WAN ) and (1x ADSL2+/VDSL2 port), The wireless antenna is integrated in the device but can be replaced with any half mini PCIe module.

Is a sky Q hub a router?

The Sky Q Hub isn’t just a regular router though, instead it’s an integral part of the Sky Q system. That means the other components, your Sky Q set-top box and any Sky Q Mini boxes act as wireless repeaters, expanding the range of your Wi-Fi network.

What is UPnP service?

UPnP (Universal Plug and Play) is a networking protocol that enables devices to discover each other and connect without the need for manual configuration or user intervention. The protocol automates all the steps necessary for recognition and communication between devices on the same network.

How do I open my Sky Broadband Router?

Type 192.168. 0.1 (the most common IP for Sky routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Sky router is admin.

How do I turn off the firewall on my Sky router?

How do I switch off Sky Broadband Shield?

1. Go to the main Sky Broadband Shield website.
2. Enter your Sky ID username and password.
3. Scroll down the page until you see the Switch off button.

Why is my Sky broadband blocking websites?

To help keep kids safer online, 18+ rated websites and online content are automatically blocked when you’re connected to the Sky Mobile network. If you’re using Wi-Fi, parental controls won’t apply. Your broadband provider or public Wi-Fi provider might have other settings or filters.

Can you replace a Sky router with your own?

We recommend using a Sky Wi-Fi router, but if you have a router that you’re particularly attached to and you want to keep using, or have an existing Home Wi-Fi solution that you’re happy with then no worries. Sky Broadband will work with most routers, though some may not be compatible or could be tricky to set up.

Will Sky replace my old router?

Sky said that if there is a fault with a customer’s router and they are in warranty, they will also replace it free of charge.

Can I use my old Sky router as a WiFi booster?

Yes you can use it as an access point. Briefly, you connect the sky hub to a lan port of either the Plusnet Hub/Ethernet switch via ethernet, then on the Sky Hub you need to disable DHCP, and give it an IP address thats within the same subnet as the PN Hub, but ideally outside it’s DHCP pool.

Is Sky Q Hub better?

Should I get the Sky Broadband Hub or Sky Q Hub? Both are a good bet. But if you’re struggling with Wifi signal and speeds, we’d recommend the newer Sky Hub, which provides a stronger, wider ranging signal. The latter is also better equipped to handle lots of devices.

Is Netflix free with Sky Q?

There’s also a Sky Q box with access to channels including Sky Max and Sky Comedy plus that Netflix subscription for free.

Should I turn off UPnP?

UPnP, therefore, is not inherently dangerous if your router is up to date and has all the latest firmware updates, and your connected devices are free of malware. UPnP becomes an issue if a connected device is infected with malware, as it can spread to your local devices.

Is enabling UPnP safe?

Is UPnP Dangerous? Though the UPnP protocol is safe, it can facilitate insecure connections. A UPnP protocol could permit devices with critical vulnerabilities to connect to your network and sensitive resources.

What is the default username and password for Sky Broadband router?

Sky Router Login Guide The default username for your Sky router is admin. The default password is sky. Enter the username & password, hit “Enter” and now you should see the control panel of your router.

What is Sky broadband username and password?

Re: Access my sky router – username and password If this is one of the newer hubs (e.g. SR203) then the username will be admin, and the password will be the same as the wifi password. It should mention this on the sticker on the back of the hub.

What happens if I disable firewall on router?

Effect. Disabling a firewall permits all data packets to entering and exiting the network unrestricted. This includes not just expected traffic, but also malicious data — thereby putting the network at risk.

Why is my Sky Broadband blocking websites?

How do I remove Sky Broadband restrictions?

Change your parental control settings

1. Go to sky.com/controls and sign in with your Sky iD.
2. Select the mobile number/plan you want to update.
3. Scroll to ‘Parental controls’, select Turn off parental controls or Turn on parental controls and follow the instructions.

Are Sky routers locked?

Sky have always locked their supplied routers and even if you were a customer they would not be able to tell you username and password to connect to their network. (Different to any username you log into router with).