What are the parts of a drill press called?

What are the parts of a drill press called?

A drill press is a stationary drill that is secured by bolts to a workbench, floor or stand. It has five parts, including a base, table, column, spindle and drill head.

What are the 4 major parts of the drill press?

This style drill press is composed of four major groups of assemblies: the head, table, column, and base. The head contains the motor and variable speed mechanism used to drive the spindle. The spindle is housed within the quill, which can be moved up or down by either manual or automatic feed.

What is the rotating part of the drill press called?

The spindle holds the drill or cutting tools and revolves in a fixed position in a sleeve. In most drilling machines, the spindle is vertical and the work is supported on a horizontal table.

How many types of drill presses are there?

There are two main types of drill presses: bench top and stationary models. Bench top models are smaller, lighter and more portable. Floor models are heavier and harder to move, but have more power, capacity and features.

What is the top of a drill press called?

Structurally, a drill press consists of a base, column (or pillar), table, Spindle (or QuillChuck, and usually is driven by an Induction Motor and belt. The head has a “feed lever” radiating from the quill’s sleeve that, when rotated, moves the Spindle and Chuck up and down, parallel to the column’s axis.

What is the top part of the drill called?

The top part of the seed drill is called ‘shank’.

What is a 15 drill press?

Description. These drill presses are made for the hobbyist to avid woodworker in a small shop. Generals’ 15” Variable Speed Floor Drill Press has a global patented “X” cross-hairs for drilling accuracy, digital read-out (DRO) for drilling or sanding, 3 1/8” spindle travel for maximum depth cutting.

What is the quill on a drill press?

In a drill press, the quill is the hollow shaft that surrounds the spindle. The spindle is the rotating shaft that the chuck is mounted on.

What are the main parts of drill press and its function?

The main function of the head is to hold and to control many of the other components. The head of the drill press holds other components such as the spindle, the chuck, the drill bits, and the control lever. The drill press’s motor is also housed directly below the head.

What is the name of part between point and shank of drill bit?

Body. The body between the shank and the point of the drill is called the body.

What does a 12 drill press mean?

​Drill press swing is the distance from the center of the spindle (where the drill bit would be inserted) to the support column (the pole that holds the drill press upright) multiplied by “2”. So a drill press with a 12″ swing is able to drill a hole in the CENTER (6″) of a 12″ circle (or square) piece of material.

What does 8 inch swing mean on drill press?

Size Matters The size of a drill press is measured in terms of “swing,” which is defined as twice the throat distance (the distance from the center of the spindle to the closest edge of the column or post). For example, a 16-inch drill press will have an 8-inch throat distance.

What are some names of drills?

10 Different Drill Types

  • Drill Driver. A drill driver is by far the most popular type of drill amongst homeowners – and the reason behind that is quite simple.
  • Impact Driver.
  • Hammer Drill.
  • Rotary Hammer Drill.
  • Core Drill.
  • Ground Auger.
  • Screwdriver Drill.
  • Cordless Drill.

How do I know what Chuck key I need?

The best thing to do is measure the diameter of the pilot hole/shank and match that diameter with the drill chuck size you have. For example, if your pilot is 11/32″ and your drill chuck is 1/2″, you would need a CK-TKR.

How do I know my chuck key size?

How to Size Chuck Keys

  1. Look closely at the chuck on the drill for the engraved numbers. The chuck size looks something like: 1/4, 3/8, 1/2 etc.
  2. Measure the diameter of the hole on the side of the chuck in inches with a ruler.
  3. Take these two dimensions to your local hardware store to make your selection.

What is the base of the drill press?

A drill press is composed of a base that supports a column, the column in turn supports a table. Work can be supported on the table with a vise or hold down clamps, or the table can be swiveled out of the way to allow tall work to be supported directly on the base.

What is the spiral on a drill bit called?

Twist bits. Twist bits, also called twist drills, are the most common of the drill bits used. They can penetrate a wide variety of materials, including wood, metal and plastics. What distinguishes them from other drill bits are the spirals along their length as well as its front edges.

What’s the end of a drill called?

The shank is the end of the drill bit that fits into the drill and is secured by the chuck. A round shank helps to center a bit in the chuck more accurately. The flat surfaces on a hex shank allow the chuck to grip the drill bit more securely.

What does 10 inch swing mean on a drill press?