Advice

How do I setup my Arris TG862?

by Admin

How do I setup my Arris TG862?

To Install TG862

  1. If the modem includes a battery, install the battery with the following procedure:
  2. Connect the phone cable from one of the telephone ports of the TG862 to the telephone base.
  3. Connect the Ethernet cable from the Ethernet port of the TG862 to the Ethernet port of the computer.

How do I reset my Arris TG862?

Factory Reset With The Reset Switch

  1. Carefully insert the tip of a pen or an unwound paperclip into the reset switch and press on to it.
  2. Hold down the Reset switch for at least 15 seconds and release it. NOTE: Performing a reset will take the TG862 out of Bridge Mode, if it had been previously enabled.

How do I log into my Arris TG862 router?

For the ARRIS TG862, you have to do the following steps for access:

  1. Turn on router.
  2. Connect the device via Wi-Fi* or a network cable with the router.
  3. Open web browser.
  4. Insert IP address in the address bar and confirm with ‘Enter’ button.
  5. Enter username as well as password in the login form and confirm.

Where is the WPS button on my Arris router TG862?

To Establish WPS Push-button Connection Push the WPS button on the side panel of the TG862. The Secure LED will begin to flash. Once the WPS connection has been made, the Secure LED will be solid for a moment, and then will turn off. Verify the wireless client for connectivity.

Why is my Arris router not working?

Check that the power cord is properly plugged into the wall outlet and rear panel of the modem. Check that the electrical outlet is working. If electrical connection is OK and modem reset does not work, contact Customer Support. Check the coaxial cable connection at the modem and wall outlet.

How do I troubleshoot my Arris router?

Try these troubleshooting steps:

  1. Unplug power cord from gateway for 30 seconds and then plug it back in.
  2. Check if power cord is damaged.
  3. If the cord is connected to a power bar, try connecting it directly to the wall outlet.
  4. Try another power outlet.
  5. If the light is still red, call 1.800. SASKTEL (1.800. 727.5835).

How do I access my Arris router settings?

Open up a web browser (Internet Explorer, for example) and enter the IP address http://192.168.0.1 in your browser’s address bar and press Enter. The Login window will prompt for the router configuration username and password.

How do I find my Arris router username and password?

The default username is “admin,” and the Arris default password is “password.” After you connect, you can change a variety of settings depending on your Arris device model, often including passwords, wireless connection settings and other information.

Does my Arris router have a WPS button?

WiFi Protected Setup (WPS) Press the WPS button located on the top of the modem. Press and hold the WPS button on your WPS-enabled computer or other device (not all devices support this type of connection) for five or more seconds.

Where is the WPS PIN on Arris router?

Locate the WPS PIN on a white sticker on the back panel. The WPS PIN will be displayed (as seen below). NOTE: The WPS PIN consists of eight numbers. Enter the pin into the WPS client.

How do I fix my Arris modem WiFi?

Most Arris routers can be reset using the Reset Button.

  1. Locate the Reset Button on your Arris modem or router (typically found on the back of the device).
  2. When you locate the button, press and hold it for at least 15 seconds.
  3. Wait for the reset to complete—this process can take a few minutes.

What lights should be on my Arris modem?

Troubleshoot Arris modem shows blue lights On completion, the Downstream light will blink GREEN. After the modem synchronizes on a Downstream channel, the Downstream light will turn solid GREEN, and the Upstream light will start blinking GREEN.

What lights should be on my Arris router?

ARRIS/Surfboard SBG6700

Modem Light Status
Online Solid Green indicates the modem is operational.
2.4 GHz Wireless Solid Green indicates 2.4 GHz wi-fi connection
5.0 GHz Wireless Solid Green indicates 5.0 GHz wi-fi connection

What do the lights on Arris router mean?

Flashing green and solid green: A flashing green color means the gateway has connected to a power source and needs no further action. Solid green means the gateway is on and working well. Solid blue: A solid blue color means your broadband internet connection is active.

What lights should be on Arris?

Understanding the status lights and buttons on your ARRIS NVG448 gateway

Colour Status
Off The gateway is off or not receiving power
Solid red The gateway is not booting properly (error)
Flashing green The gateway just connected to power
Solid green The gateway is on

How do I find my Arris router IP address?

Arris Default Router Login and Password. Enter http://192.168.0.1 into your browser and press enter.

What is Arris admin password?

password
The default username is “admin,” and the Arris default password is “password.” After you connect, you can change a variety of settings depending on your Arris device model, often including passwords, wireless connection settings and other information.

How do I reset my Arris admin password?

Set a new password

  1. Open a web browser.
  2. Enter “192.168.
  3. Enter the username “cusadmin” (lowercase).
  4. Enter the current password (case sensitive) found on the white sticker on your modem.
  5. Click Manage Wi-Fi Network.
  6. Click the 2.4G or 5G tab, for the network you want to set a new password.

Where is the WPS PIN on my Arris router?

What if my modem doesn’t have a WPS button?

If your router doesn’t have a WPS button, you can use the web based set-up with an internet browser to set up your Wi-Fi connection. The instructions for this method usually come with your router device.

How do I manually configure my Arris cable modem?

– Model – Wi-Fi cable modem model name – SSID – Default network name for your Wi-Fi home network. – WI-FI SECURITY KEY – Wi-Fi network password to connect to your Wi-Fi home network. – S/N – Wi-Fi cable modem serial number. – HFC MAC ID – Your service provider may request the Media Access Control (MAC) number to activate your Wi-Fi cable modem.

How to log in to an arris router?

Open a browser of your choice and type in the Arris router’s default IP address: 192.168.0.1. Hit Enter.

  • The Arris web interface will now open and ask for your Username and Password.
  • Enter the username and password that you have set. If you haven’t set any username and password,enter the default values of them.
  • The default username is “admin” and the default password is “password.”

    • How to set Arris modem to router mode?

    a. Enter admin in the Username field. b. Enter password in the Password field. c. Click the Login button. The System Basic Setup page appears. Click the LAN Setup tab on the top menu. The LAN Settings page appears. On the LAN Settings page: a. NAT Mode – Click on the drop-down, and select Bridged. b. Click the Apply button.

    How to reset an arris router or modem?

    Log in to your Arris router or modem.

  • Look for a section labeled Security or Utilities (this can vary depending on your router model).
  • Choose the option to factory reset the device to default settings.
  • Wait a few minutes for the reset to complete.