Advice

How do I program my Tyt 8600?

How do I program my Tyt 8600?

While holding down the A/B, Lock and power switch reapply power. This will put the radio in programming mode. On some TH-8600 it is not necessary to remove power.

What is cross band repeater?

Crossband Repeating is a process where a Ham transmits one signal on one band (typically UHF), and it is received by another radio with a better antenna/power installation, and re-transmitted (typically on VHF) to another radio system, or a repeater.

How do I unlock my TYT radio?

Unlocking the TYT MD-9600

  1. Power the radio on.
  2. Remove all power to the radio.
  3. Hold down the P1 and P2 buttons on the front of the radio.
  4. Power up the radio while holding these buttons until the power on tone sounds.
  5. No notification/confirmation is provided, but the radio is now unlocked.

Are Crossband repeaters legal?

They are really “crossband repeaters” and they are legal only if both ends are within authorized repeater segments of both bands. Repeater operation (including all input and output frequencies) is prohibited on all HF amateur bands, except the top end of 10 meters.

What frequency does CB radio use?

26.965 to 27.405 MHz
The CB Radio spectrum is broken up into 40 channels with CB frequencies ranging from 26.965 to 27.405 MHz. Channels are generally spaced 10 KHz apart.

What is cross band used for?

Crossband (cross-band, cross band) operation is a method of telecommunication in which a radio station receives signals on one frequency and simultaneously transmits on another for the purpose of full duplex communication or signal relay.

What does Crossband repeater mean?

What is Crossbanding in ham radio?

Which GMRS channels are high power?

Channels 15-22, however, offer GMRS users the highest power option, so these are preferred for tactical communications.

What is channel 9 on a CB?

emergency services
Channel 9 is commonly used by emergency services; you should only use it for legitimate distress messages. As for installation, it’s a simple project, according to CB World Informer. First, mount the radio where it can be easily accessed.

Can You program a th-9800 through a computer?

Programming the TH-9800 The TH-9800 can be programmed direct from the radio or through a computer via an optional TYT mobile programming cable and software. Although not absolutely needed, the programming cable and software are highly recommended and programming the TH-9800 through a computer is definitely encouraged.

Is the TYT th-9800 a good alternative to the Wouxun 7800?

However, compared to the Wouxun KG-UV950P quad band transceiver, the TYT TH-9800 is a really solid, high value alternative. Like the 7800, reception on the TH 9800 is broad. it can receive wide band AM and FM on 26-33MHZ, 47-54MHz, 108-180MHz, 320-512MHz and 750-950MHz (except cell phone frequencies).

What is the rps-9800 programmer?

TH-9800 Radio Programming Software The RPS-9800 Programmer is designed to give you the ease and convenience of programming the memories and set menu options of your radio from your PC. Memory Channels Include: 800 Memory Channels

Where can I mount the th-9800 dual display?

You can hide the radio and mount the front control panel with the dual display almost anywhere you want in your vehicle. The TH-9800 can be programmed direct from the radio or through a computer via an optional TYT mobile programming cable and software.