How do I connect my WD TV to my wireless network?
How do I connect my WD TV to my wireless network?
Instructions
- Go to “Setup” on your WDTV.
- Go to “Network Settings”.
- Select “Network Setup”.
- Select either “Wired” or “Wireless” connection.
- (Applicable for “Wireless”) Select “Previously connected wireless network” if you are currently connected to a network.
How do I update my WD TV Live Hub?
Instructions
- Download the .
- Extract the GPL source code from the .
- Extract and Install the “Launcher” firmware onto the WD TV Live Hub.
- Put the “Launcher” firmware (wdtvlivehub.
- After you have finished the upgrade for the “Launcher” firmware, you will be given two choices: “Official” and “GPL”.
What happened to WD TV?
The WD TV was discontinued as of August 2016.
How do I reset WD TV Live streaming media player?
The player should reboot when you release the button. If you were already on the composite output you could try pressing the reset button for over 10 seconds and then releasing, again with the player fully booted up, this will change the standard from NTSC to PAL or vice versa and may overcome your problem.
How do I reset my WD TV Live Hub?
A long press of the reset button (10sec) changes the TV standard from PAL to NTSC or vice versa. A short press resets to factory defaults without wiping any data. You must have the hub fully booted up for it to work.
What is the latest firmware for WD TV Live?
Current Firmware – 1.06. If Internet connection is not available, you can download the firmware file and follow the steps below to update: Download the latest firmware update compressed file for your WD TV Live Plus HD media player. Extract the three files (.
How do I connect WD TV Live to my computer?
One option would be ‘wdtv’ for both username and password. At first login on WDTV, check the box for remembering access details. On the PC, in ‘File Explorer’ (on the toolbar at the bottom of the screen), select the directory to be shared, right-click and select ‘Properties’ and select ‘Sharing’.
What is a good replacement for the WD TV Live?
Plug-n-Play Boxes with Remote:
- Nvidia Shield TV, (Android TV box, very pricey, overkill)
- Vero 4K+, with Amlogic S905X (one of the best, non-Android, affordable OSMC boxes)
What is WD TV Live streaming media player?
The WD TV Live HD Media Player from Western Digital is a digital media player for TVs or HDTVs. It can be used to play back video, audio, and pictures over your home network or from any USB hard drive or storage device.
How do I connect my WD TV to Windows 10?
WDTV_Live_User%27s_manual_English. pdf
- Control Panel -> Programs -> Turn Windows feature on or off.
- Expand “SMB 1.0/CIFS File Sharing Support”
- Check “SMB 1.0/CIFS Server” (all three SMB 1.0 settings are now checked)
- Press Ok and let the feature install.
- Reboot (not sure this is needed)
How do I put Netflix on my WD TV?
TV Live
- From the main menu of the Western Digital TV Live Hub, select Service.
- Under Featured, select Netflix.
- Under Are you a member of Netflix, select Yes.
- Enter your Netflix e-mail address and password, then select Continue.
How do I connect my WD TV Live Hub media center to my computer?
You need to power on your Hub. The connection should be ” Computer” should connected to one of ehernet ports on the Router and then Live hub should be power on and connected to one of the ethernet port on the router. Then use WD discover tool.
What can you do with a WD TV Live?
Play all your media files – WD TV Live supports a wide variety of the most popular files including MKV, MOV, AVI, ISO/VOB and much more.