What size is Borg Warner s366?
What size is Borg Warner s366?
Forged-Milled Wheel (FMW) Extended Tip Compressor Wheel OD (exducer): 91.4mm Compressor Wheel. Inducer: 66mm Max Flow Rate: 94 lb/min Compressor Housing Connections: Inlet: 4.0 Hose Coupler.
What size turbo is a S475?
See all 19 photos The S475 was equipped with an 83mm turbine wheel and 1.0 AR turbine housing. See all 19 photos Run on the dyno with the Borg S475, the turbo 6.0L produced 878 hp and 804 lb-ft of torque at a peak boost pressure of 11.3 psi. See all 19 photos Next up was the larger Borg Warner S480.
What mm is a s366 turbo?
Wheel Dimensions: Compressor: 66 mm inducer / 91.4mm exducer, with exclusive Extended Tip Technology. Turbine: 80 mm inducer / 73 mm exducer.
What MM is a S400 Turbo?
Rated at 500 to 1050+HP High-flow S400 model, with compressor flow over 105 lb/min. Wheel Dimensions: Compressor: 74.7 mm inducer, 100.8mm exducer, with exclusive Extended Tip Technology. Turbine: 83mm inducer, 74mm exducer.
What does SXE mean on a turbo?
The SXE line of turbos is the latest innovation in turbochargers. The SXE turbos comes standard with 360 thrust bearings for longer turbo life and able to withstand higher boost levels and drive pressures. The SXE line also comes standard with a billet wheel for quicker spool up and increased airflow.
What size turbo is a GT45?
The cold side of DNA’s GT45 clone turbo featured a 0.66 A/R, a 69mm inducer, and a 98mm exducer. The hot side included an 88mm inducer, a 77.5mm exducer, and 1.05 A/R.
How big is a gt45 turbo?
| Turbine Size | ——- |
|---|---|
| * Trim: | 78 |
| * Inducer Diameter: | 88mm |
| * Exducer Diameter: | 77.5 mm |
| * A/R: | 1.05 |
How much power can a S480 Turbo make?
click image to purchase your own Borg Warner S480! Starting with the flow capabilities, it’s proven to make well over 750hp and pushing the limits of 1200+hp on the right engine.
What MM is a 171702 turbo?
Product Description. BorgWarner 171702 – BorgWarner Turbocharger SX S400 T6 A/R 1.32 74.7mm Inducer.
What size turbo is a S369?
S369 SX-E Supercore (80/74mm Turbine Wheel)
What size is a S300 Turbo?
BorgWarner SX-E S300 has three T4 turbine housings available for each turbine wheel size 76mm and 80mm: 0.88 Open Volute. 0.91 Twin Scroll. 1.00 Twin Scroll.
How much HP can a GT45 turbo make?
The GT45 turbocharger assembly is designed to be used on engines displacing 3.5L-8.0L and is typically good for around 800HP.
How much power can a GT45 make?
The GT45 clone seemed to fit the bill, as these were advertised online with power outputs ranging from 600 hp to as high as 800 hp, depending on the seller. Though many sources offered this same turbo, the pricing varied by over $200 in some cases, and even varies from day to day from the same manufacturer.
What size is a T6 turbo?
Which size do you need?
| Turbo | Circumference | Width |
|---|---|---|
| T3 | 38 ~ 41cm | 5 cm |
| T25 / T28 | 38 ~ 41cm | 6 cm |
| T4 | 51 ~ 56cm | 7 cm |
| T6 | 66 cm | 9,5 cm |
What size is a s472?
87.37/81.74mm Turbine Wheel.
What is a SXE Turbo?
How much boost can a GT45 handle?
Product Description. The GT45 turbocharger assembly is designed to be used on engines displacing 3.5L-8.0L and is typically good for around 800HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi(.
How much HP does a GT45 turbo have?
600-800HP
| GT45 Turbo | GT3037 Turbo | |
|---|---|---|
| Horse Power: | Up to 600-800HP | Up to 500HP |
| Exhaust (Turbo Manifold) Flange: | T4 4 Bolt Flange | Standard T3 |
| Exhaust (Downpipe) Flange: | 3.5 ” V-Band Flange | Standard 4-Bolt |
| Cooling Type: | Oil Cooled | Water + Oil |
How many MM is a T4 turbo?
| Compressor Size | ——- |
|---|---|
| * Inducer Diameter: | 52.7mm |
| * Exducer Diameter: | 76mm |
| * A/R | 0.5 |
| Compressor Outlet | 42mm(inside diameter); 52mm(Outer diameter) |
What size is a T28 turbo?
Turbine Wheel Inducer: 52.9 mm. Turbine Wheel Exducer: 46.3 mm.
How much HP can a S472 handle?
The S472/87 is “the” charger when it comes to balancing overall performance with low end spool-ability. This charger is the BEST choice for someone who is towing light (7K lbs ish max range) and wants about 800 HP capability.
What is a S472 Turbo?
Borg Warner S472 A durable turbo with enough airflow to cool up to 650hp. Swap out for a smaller turbine and exhaust (83/1.10) for towing, Select the standard Borg Warner large turbine (96/1.32) for racing, Select the medium turbine (92/1.10) for midrange response/power.
What MM is a GT45 turbo?
| Compressor Size | ——- |
|---|---|
| * Trim: | 50 |
| * Inducer Diameter: | 69mm |
| * Exducer Diameter: | 98 mm |
| * A/R | 0.66 |
How much HP can a T4 turbo make?
T4 turbos are usually for larger motors and use a different exhaust flange. T4’s can deliver enough air for applications in the 400 to 800HP range. T4’s have been very popular in full tilt 2.5+L Subaru setups to make loads of horsepower.