Is Erse audio still in business?

ERSE audio is an electronics audio manufacturer with over 20+ years of experience. ERSE is an acronym for Engineers Researching the Science of Electronics. We have run our business by this meaning for over 20 years and it continues today.

Are Erse capacitors good?

ERSE Audio Grade Capacitors are great for all audio and general electrical applications. From Non-polar Electrolytic to polypropylene caps, ERSE has what you need to make your design not only work, but work at the level of quality you expect.

What do inductors do in crossovers?

A crossover inductor acts in the reverse manner — it is only a good conductor when the frequency is below a certain level. When the electrical audio signal travels through the speaker wire to the speaker, it passes through the crossover units for each driver.

Which capacitors are best for audio?

The best capacitor types for audio circuits are polystyrene and polypropylene. Polystyrene is the first choice, but are only available in values up to . 001 uF.

Are JB capacitors any good?

“The jb JFX capacitor is a fine capacitor with a high quality build, and competes well with the Erse capacitor.” “I must tell you that this is my second order of JFX caps from you which I am using in parallel to bypass power caps in a tube amplifier. The results are staggeringly good, hence my second order.

Do speakers have capacitors?

The purpose of the capacitor in series with the loudspeaker is to block DC current which could potentially destroy both the amplifier and the speaker.

What is the purpose of an inductor in a speaker?

They’re used in electric motors, solenoids, spark plug coils, and, of course, speaker crossover designs. Inductors behave like the opposite of capacitors: an inductor opposes high frequency signals meaning it passes low frequency audio signals more easily.

Does a capacitor help subwoofers?

Adding Capacitors The capacitor will smooth out the peaks in current draw from your amplifier during peaks in the music. The capacitor will help ensure your music does not go flat, but has the dynamic quality you love.

Are Bennic capacitors any good?

Bennic is one of the largest suppliers of crossover components in the world. The XPP range is Bennic’s premium range of quality metalized polypropylene film capacitors. These capacitors have excellent characteristics and are well-suited for high quality audiophile products such as amplifiers and speaker crossovers.

Why do capacitors sound different?

Capacitors sound different. They can be in the power supply or the signal path and depending on their type and construction, provide very different sound quality on a high end audio system.

Why do tweeters need capacitors?

In a simple passive crossover, we use a capacitor to limit the amount of low frequencies that make it to the tweeter. This does two things: 1) it protects the tweeter from the application of too much power at low frequencies, and 2) it helps us shape the response of the tweeter to match the response of the midrange.

Which capacitor is best for audio?

What do capacitors do for speakers?

The job of capacitors is to allow only the high frequencies to pass. The inductor (also known as a coil or choke) assumes the opposite task by letting only the low frequencies pass. It does this by storing energy in magnetic instead of electrical form.

What is inductance in audio?

Inductance does somewhat the same thing to the audio signal, but through different means. The magnetic field set up by inductance resists changes in current flow–and an alternating current signal is constantly changing.

How many watts before you need a capacitor?

Sizing Caps The general rule is to add 1 Farad of capacitance for every 1000 watts RMS of system power. Note that it does not hurt to use more capacitance than this rule and many systems use 2 or 3 Farads per 1000 watts RMS.

How many farads do I need for a 2000 watt amp?

25-Farad
The general rule-of-thumb when selecting capacitors is 1 Farad Per 1,000 Watts….

Where are Dayton capacitors made?

th U.S.A.
The capacitors are housed in rugged plastic cases, which require no added insulation. Made in th U.S.A. , BMI Capacitors are designed and engineered to the highest EIA Standards.

What does putting a capacitor on a speaker do?

Why would you put a capacitor on a speaker?

Does a woofer need a capacitor?

A subwoofer capacitor is often installed in audio setups that use large amplified subs for bass. Each time a large subwoofer activates, a high amount of electricity is drawn from the audio system.

What do inductors do in speakers?

Inductors behave like the opposite of capacitors: an inductor opposes high frequency signals meaning it passes low frequency audio signals more easily. An electrical behavior called reactance is what makes this possible.

Why choose Erse audio grade capacitors?

ERSE Audio Grade Capacitors are great for all audio and general electrical applications. From Non-polar Electrolytic to polypropylene caps, ERSE has what you need to make your design not only work, but work at the level of quality you expect. ERSE audio inductors are wound using state of the art technology for years.

Why Erse audio inductors?

ERSE audio inductors are wound using state of the art technology for years. With instruments such as hysteresis tension devices, computer-controlled winding machines, and bobbins and tools that optimize the Wheeler formula, ERSE can supply coils with 1% tolerance.

Why choose Erse for audio products?

We at ERSE strive to provide you the absolute best audio experience. This feature will help you find the highest quality products for your audio needs.

Why choose Erse’s Q coils?

Quite simply put if you want the best sound from your system your choice should be none other than ERSE’s Q line of coils. Quality coils begin with quality components. All of our “Q” series offer our PURITY GUARANTEE.