How much does 5 gallons of asphalt sealer cover?

between 250-500 square feet
Average Asphalt Sealer Prices Note: The typical 5-gallon sealcoat container can cover between 250-500 square feet depending on the material’s condition and texture.

How much does a 5-gallon bucket of driveway sealer cost?

Asphalt driveway sealants cost $0.06 to $0.38 per square foot, which works out to $40 to $165 per 5 gallons, based on the average 5-gallon sealcoat covering up to 500 square feet. But remember, the cost per foot and the amount of product you need varies based on the viscosity of the sealant.

Do it yourself driveway sealer vs professional?

The biggest difference between DIY sealcoating and professional sealcoating is that professionals use spray tanks. Edges are still done the same way, but large areas are evenly coated with a large tank that feeds a high pressure spray wand.

How far does a gallon of driveway sealer go?

One gallon of sealer covers approximately 80 square feet of driveway. Finally, divide the number of gallons you need by 5 to calculate how many buckets you’ll need for one coat of sealer –each bucket of sealer is generally 5 gallons.

Is it better to spray or squeegee driveway sealer?

Sprayers provide better control of the amount of sealant used, making the application process more precise. Squeegee machines take a little longer than sprayers, but hand squeegees are the most timeconsuming. On many jobs, it will take twice as long for workers to apply sealcoating by hand.

Is it better to spray or brush driveway sealer?

Is one coat of driveway sealer enough?

Applying two coats of any sealer will dry and create a better finish much better than one thick coat. These sealers are water based, and they cure and form a film primarily during the evaporation of water from the coating. A thin coat will evaporate much faster and create a single uniform layer.

Is a second coat of driveway sealer necessary?

Can you roll on asphalt sealer?

If you’re applying an acrylic-based driveway sealer, which is designed for concrete or masonry surfaces, it can be applied with a roller. If you’re applying an asphalt-based product, however, it must be applied with a squeegee.

How many gallons of driveway sealer do I need?

Divide the square footage of the driveway by 80 to find the number of gallons of sealer you need for one coat. Each gallon covers about 80 square feet and each bucket of sealer contains 5 gallons.

Is it better to brush or squeegee driveway sealer?

Squeegee applications typically produce a better bond between the pavement’s surface and the sealant. The pressure exerted by the squeegee forces the sealant into surface cracks and voids, creating a bond that is of higher quality while often yielding a smoother appearance.

How much does a gallon of asphalt sealer cover?

Divide the square footage of the driveway by 80 to find the number of gallons of sealer you need for one coat. Each gallon covers about 80 square feet and each bucket of sealer contains 5 gallons. Divide the number of gallons by 5 to find the number of buckets you need, reveals MV Organizing.