How do I fix BCD corruption in Windows 7?

You can run the bootrec utility to rebuild the BCD:

1. Boot from the Windows 7 DVD.
2. Click Repair your computer or press R.
3. At the System Recovery Options window, click Command Prompt.
4. When Command Prompt loads, type this command: bootrec /rebuildbcd.
5. Press Enter.

How do I fix boot BCD startup errors in Windows?

Step by Step guide

1. Insert the installation media into the PC.
2. Find out how to access the BIOS/UEFI of the machine.
3. Change the boot order so that the computer boots from the USB or DVD drive before it boots from internal hard drives.
4. Click next on the first screen of setup.
5. Select Repair your computer on the next screen.

What is Boot BCD windows7?

What is Boot BCD in Windows 7/8/10? BCD (Boot Configuration Data) is a firmware-independent database for boot-time configuration data. It is required by the new Windows Boot Manager and replaces the boot. ini used by NTLDR. It contains the menu entries presented by the Windows Boot Manager.

Can I repair Windows 7 without CD?

Press and hold the F8 key. Step 3. Then you will see the Advanced Boot Options screen. Here you can choose Repair Your Computer to run Startup Repair.

How do I fix my computer needs to be repaired boot configuration BCD error code 0xc0000098?

1) Boot your PC from your setup disk (USB/DVD/CD). 2) Select Repair your computer and go to Troubleshoot > Advanced Options > Startup Repair. 3) Startup Repair will begin scanning your installation for known issues and will attempt a repair if it finds any. 4) If it fails, you can run Startup Repair again.

What causes error 0xc0000098?

0xc0000098 is a BSOD error code that may appear after cloning OS or upgrading to Windows 10. This error code is caused by two issues: The BCD has no entry, which may be caused by disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually. Incompatible hard drive driver.