How do you reset a Jabra Freeway?
How do you reset a Jabra Freeway?
How do I reset my Jabra Freeway?
- Turn on the Jabra Freeway by switching the On/off switch to the “on” position.
- Simultaneously press and hold (5 seconds) the Answer/end, Voice, and Mute buttons until you hear a beep tone.
- The Jabra Freeway is now reset and is ready to pair again.
How do I pair my Jabra hands free device?
Go to the Bluetooth menu on your phone . Turn on or enable Bluetooth . Search for devices and select your Jabra hands free device . Select pair or OK .
Why is my Jabra speaker red?
Here is an explanation of the LED colors and behaviors….Prerequisites.
| Indicator | Battery state |
|---|---|
| Orange | Medium |
| Red | Low |
| Flashing red | Low battery notification |
| Off | Charging done |
How do you reset a Jabra Bluetooth?
How do I reset my Jabra Wave?
- Turn on your Jabra Wave.
- Simultaneously press and hold the Volume down button and the Answer/end button for 5 seconds, until the battery icon and the Bluetooth icon flash 5 times.
- Your Jabra Wave has now been reset, and you may turn it off.
How long does a Jabra firmware update take?
to 15 minutes
A firmware update may take up to 15 minutes. During the update, do not open the charging case until at least 10 seconds after the LED has stopped flashing. When the update is completed, the charging case LED will briefly flash green and then turn off.
How do I reset my Jabra speaker?
To reset the Jabra speakerphone, simultaneously press and hold (8 seconds) the Answer call button and the End call button until “Factory reset” is announced. Resetting the Jabra speakerphone clears the list of paired Bluetooth devices and also clears all personalized settings.
What does the blue light on Jabra mean?
The battery indicator flashes blue when the unit enters sleep mode. This may happen after 8 hours of inactivity, for example if the USB host device is turned off, or if the USB cord is unplugged from the USB host device.
What do the lights mean on the Jabra?
Green: 67-100% Yellow: 34-66% Red: 0-33% LED on charging case and combined earbuds. Green: 67-100%