How thick can a 7 inch tile saw cut?

around 2 inches
An 7-inch diamond blade on a tile saw typically has a maximum cutting depth of around 2 inches, while a 10-inch blade can increase that by about half an inch to 2.4-2.6 inches.

Can I cut tile with a skill saw?

Can you cut tile with a circular saw? Shortly, the answer is yes. It can be cut with a traditional manual tile cutter or a wet tile saw. With the tile cutter, a specific scoring wheel gets a shallow cut in this material.

How long is a tile blade good for?

If you are working with a low quality diamond blade, but you are cutting under an ideal circumstance, it can last around 12 hours. However, if you are cutting very heavy materials, you don’t have a proper technique or you are dry cutting, the life expectancy can be half or less.

How often should you change wet saw blade?

They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they’re used to cut.

Can you sharpen a wet saw blade?

Sharpening a tile saw blade requires making a slurry out of an abrasive material and the saw’s coolant or water. Reduce the coolant or water flow. Adjust the valve until the flow is half open. Select an abrasive item to dress the tile saw’s diamond blade.

Can a wet saw cut your finger?

As long as you don’t push too hard, it won’t build up enough friction to damage your skin (xpost from /r/gifs)

Where does water go in wet saw?

Though a wet saw—the traditional tool for cutting tile—may look intimidating, it’s surprisingly simple to use. A wet saw has a pump that sprays water onto the tile as you’re cutting. This keeps the tile cool and prevents cracks. The blade does not have teeth, which allows it to be used for delicate materials.

How long should a wet saw blade last?

How do you know when a wet saw blade is dull?

Tough Cutting A good tile wet saw blade should cut steadily and quickly through any material, no matter how dense or hard. If you find that over time your cuts are going more slowly, or that you are exerting more and more pressure on the tile to get it through the blade, the blade probably needs to be replaced.

Can you cut granite with a wet saw?

Choose either a standard circular saw or a wet-cut circular saw to cut granite. Either will work, but the wet-cut circular saw will produce very little dust, thanks to a small tube that drizzles water onto the surface of the granite as you cut. Cut granite slab outdoors if possible to simplify cleanup.